I decided to bite my stagnant photography in the behind and went on a photoshoot-splurge today. Stand by for many, many belated FOs and outfits. Today, we’ve got a three-for-two! It’s the Bruyere shirt dress from Deer and Doe paired with the Sara leggings from Named.
Let’s start with the shirt!
If you click through on the link to the shirt pattern, you’ll see the style lines much more clearly than on my shirt. It has a waistband with a pleated skirt coming out of it. I really like this idea because it leaves it open to you how long you want to make the skirt. I kept mine to the original length which is more suited to being a tunic.
As you can see, there’s a really nice amount of ease all around the skirt. In terms of sizing, I cut a 36 for the neck and shoulders, 38 for the bust and tapered out to a 40 for the waist and hips. The fit across the back and shoulders is perfect but I need a tiny bit more room in the front so when I make this again, I’m going to add about an inch to the centre front between the neckline and the waistline.
The way the button plackets and the collar are finished off is great. There’s a front facing so everything is enclosed and it gives an amazingly clean, but easy-to-control, finish to the centre front points. I like the sleeve plackets but I think they’re a little narrow to be able to control with total precision. I think for the next time, I will add a bit more width to the piece.
What about those leggings, hmmm? I dared myself to make them. What an insane colour. I was hoping it would be darker than it turned out and then put off making them up because of it. By happy coincidence, it matches the fabric of the shirt perfectly so I had to make them!
I was really inspired by Novita’s version and used her adjustments as a guide. However, they turned out pretty short! Who knew that you need to bend your knees! I still really like them though.
The fit looks pretty good across the back but I had to take out about 6cm of excess after I put in the zip. Unfortunately for stretch materials, especially for fitted pants, it’s impossible to truly judge the fit until you have the zip in. Rather than take everything apart, I just removed the excess at the zip, which is why it doesn’t lie totally flat.
For my next go at these leggings, I didn’t remove any length at all. I left the front pieces alone but removed the 6cm evenly through the back pieces. They’re a little snug at the waist but I think given fabric’s tendency to loose its elasticity, they’ll probably wear in to be a good fit. Fingers crossed!
Here’s what they look like with just a normal pullover (from the shop… forgive me…).
If you’re interested in having a go at skinny pants, these are a really good place to start. Generally, I’ve found the Named patterns to be excellently drafted and well-fitting. These leggings take into account the stretchy nature of your fabric so don’t be put off by the finished measurements. They’re very straight forward to make, with just two pieces for the front and two for the back. There’s the centre back zip – I just used a normal one because my bum is usually covered. The only thing that makes them not a lightning-fast make is the top stitching down the front and back seams. You could totally forgo this. I personally like that detail so I did it both times.
I got smart on this pair and instead of just tacking down my facing like I did on the peach ones, I stitched in the ditch at side and centre front seams. This means I stitched right into the seamline from the right side to invisibly attach the facing. Errr… it’s not very comfortable. I could barely close them! They fit much better since I took out that stitching and just tacked the facing down like a normal person.
If you’ve made it this far, thanks for sticking with me and I’m really excited to share all my FOs from the last few weeks with you!